Virtual Events & Leak Test Webinars

 
 

Join CTS for virtual webinars and events

Cincinnati Test Systems is thrilled to offer both live and recorded webinars for our global customer-base. 

These free sessions are intended for beginner and intermediate operators and engineers to expand their expertise and knowledge of various important leak testing topics:

  • Pressure Decay Technologies
  • Mass Flow Technologies
  • Trace Gas Technologies (Sniff, Accumulation, Hard Vacuum Mass Spec)
  • Bubble Testing Conversion to Volumetric Leak Rate
  • IP67, IP68, IP69, and a Coorelation to Test Pressure and Leak Rate
  • Test Part Sealing Technology and Successful Techniques

More information about each of our virtual events is listed below. We have covered a variety of topics and new topics will be announced periodically.

To view a past session (listed below), please fill out our online registration form (click here). We will then send you an invite or YouTube link with instructions on how to join online.
 

Register online for a
link to recorded sessions:


 

Pre-Recorded Webinar Sessions

Session #1: Leak Testing 101 – Introducing the Fundamentals
•    Correlating Leak Rates
•    Variation Related To Leak Testing
•    Technology Overview
•    Technology Sensitivity
 

Session #2: Overview of Pressure Decay Leak Testing
•    Volume Dependency
•    Factors Affecting Cycle Time
•    Calibration
•    Vacuum Decay
•    Differential Pressure Decay

Session #3: Overview of Mass Flow Leak and Flow Testing
•    Technology Overview
•    Factors Affecting Repeatability
•    Calibration
•    Differential Mass Flow
•    Pressure Controlled Regulation

Session #4: Hard Vacuum Mass Spec Leak Testing
•    What is Hard Vacuum leak testing
•    How does Hard Vacuum leak testing work
•    What components make up the Hard Vacuum System
•    When should a Hard Vacuum System be used over another technology

Session #5: Conduct Leak Location Testing after a Rejected Leak Test
•    TracerMate II
•    Trace Gas Sniff Test Techniques
•    Trace Gas Background Control
•    Re-test

Session #6: Leak Station Optimization
•    Sealing Techniques
•    Factors Affecting Repeatability
•    Hold Back Force
•    Seal Wear

Session #7: Effective Sealing Techniques and CTS Connect Seals
•    Manual Placement of Seals
•    Pneumatic Actuation versus Manual Actuation
•    Automated Placement of Seals
•    Medical Applications and the Differences from other Industrial Applications

Session #8: How to Set Up a Medical Device Pressure Decay Leak Test
•    Key Characteristics of Device
•    Initial Timer Settings
•    Optimizing Fill Time
•    Optimizing Stabilization Time
•    Optimizing Test Time
•    Optimizing Exhaust Time

Session #9: How to Set Up a Medical Device Mass Flow Leak Test
•    Key Characteristics of Device
•    Initial Timer Settings
•    Optimizing Fill Time
•    Optimizing Test Time
•    Optimizing Exhaust Time

Session #10: How to Set Up a Medical Device Blockage Test
•    Key Characteristics and Reject Criteria
•    Backpressure Occlusion Blockage Setup
•    Delta P Blockage Setup
•    Mass Flow Blockage Setup
•    Flow Controlled Backpressure Occlusion Blockage Setup

Session #11: Alternative Medical Device Tests using Pressure Decay and Mass Flow Part 1
•    Multi-Port Sequential Tests (single & multi-part)
•    Bag & Bladder Tests (restraining plates)
•    Pressure Rise/Gain Tests

Session #12: Alternative Medical Device Tests using Pressure Decay and Mass Flow Part 2
•    Volumetric Verification Tests
•    Sealed Component Tests

Session #13: Alternative Medical Device Tests using Pressure Decay and Mass Flow Part 3
•    Burst Tests
•    Check Valve Cracking/Opening Tests
•     Proof Tests

Session #14: IP67 Leak Testing — Measurable and Non-Destructive Testing for a Non-Water Leak
•    Correlating water flow to an air flow measurement
•    Calibrating your system to an acceptable air flow rate for a non-water leak
•    Validating your calibrated test system
•    Non-destructive testing technologies to meet IP67 specifications


Session #15: How to integrate leak test instrumentation quickly and efficiently 
•    Basic instrument integration
•    Leak test cycle time estimation
•    Instrument control and data collection
•    Sealing and fixturing techniques

 

 

Register online for a
webinar link: