Standard and Customizable Leak, Flow, Pressure, and Vacuum Test Instrumentation
Home » Test Instruments » TracerMate CS » TracerMate CS

TracerMate CS

[TracerMate CS]

* CTS Will follow-up with you on your final quote.

Quote Request Options:

Test Type: 
  
Quantity:
Ordered in Lots of: 1

Cincinnati Test Solutions is an industry leader in the field of standard and custom test solutions, and has built a reputation as such over the course of 30-plus years. We serve the HVAC industry by offering a comprehensive line of state-of-the-art Tracer Gas Test Systems. Our products can be used for a broad spectrum of test configurations for many different products.

Testing Technologies

CTS has designed the TracerMate CS with capabilities that offer more value-added features than any other evacuation/charge units on the market.

  • Leak Location System
    Find a Leak and Fix it!
    Sniff Leak Testing is the basic type of tracer gas leak detection method to identify a leak location.
  • CS evacuation, charge, and fill instrumentation
  • CS instrumentation that communicates with Tracer Gas Detection Devices
  • Standard and custom gas reclaim or recovery systems
  • Standard gas mixer systems
  • Tracer gas leak standards
  • Standard and custom pneumatic and manual seal connectors
  • Patented Nitrogen Purge, clam shell technology for repeatable tracer gas measurement
Standard Test Types
  • Basic Sniffer Mode or Pressure Decay
  • Evac / Fill Only no Adv. Test Type  
Optional Test Types
  • Proof Test
    • Up to 10 steps
    • Single Pressure
    • Multiple Ramp Points (up to 500 PSI) with electronic regulations
    • Multiple Ramp Points (up to 1000 PSI) with electric regulation
  • Pressure Decay Test ***With Additional Pressure Source***
  • Capillary Test with Back Pressure or Mass Flow
  • Reclaim Valve
  • N2 Back Fill/Part Clean

Advanced Test Types

  • Advanced Sniffer Mode
    • Available with up to 20 test regions with a single part profiles
  • Purging Clam-Shell Mode
  • Accumulation Mode
  • Hard Vacuum - No Chamber Control
  • Hard Vacuum - Chamber Control  
Pressure Transducer Ranges:
  • Vacuum 100 psig
  • Vacuum to 200.0 psig
  • Vacuum to 400.0 psig
  • Vacuum to 750.0 psig
  • Vacuum to 1000.0 psig
  • Transducer accuracy 0.05% full scale (all ranges)
Mass Flow Transducer Ranges:
  • Many custom ranges available from 10 to 250,000 sccm thermal and differential pressure flow based
  • Transducer accuracy 0.5% full scale (all ranges)
Transducer Verification/Recertification:
  • Pressure or Flow transducers can easily be performed by user by utilizing available NIST traceable digital pressure gauges and flow standards
    • 6-point standard pressure calibration
    • 5-point standard flow calibration
  • Up to 32 point calibration of either transducer type available (menu selectable)
Tracer Gas Mixing Options
  • 100 % Tracer Gas
  • 75% Tracer / 25% N2 or Shop Air
  • 50% Tracer / 50% N2 or Shop Air
  • 25% Tracer / 75% N2 or Shop Air
  • Custom Mix %  
Built-In Inputs/Outputs and Tooling Control
  • Supplied 24VDC isolated internal power supplely exclusively for I/O use (2.5A fused)
  • 6 - 24VDC digital inputs (sinking)
  • 6 - 24VDC digital outputs (sourcing)
  • 8 – 24VDC Valve Drivers
  • Tooling control for up to 5 motions with feedback
Ethernet and (2) RS232 Communication Ports:
  • 2-Way Telnet communication
  • Test result data transmission with selectable fields
  • Pressure streaming (20 samples/sec)
  • Report transmission
  • Email of reports, test data and alerts (TCP/IP only)
  • Barcode unique part identification (RS232 only)
  • Leak Detector Communications Profile - For most Tracer Gas Leak Detection Devices
USB Port:
  • Backup/Restore
  • Cloning
  • Report storage
  • Test result data storage & result synchronization (appends data when synchronized USB drive inserted)  

Custom Solutions

Our models are available at 700 psig and at customized higher pressures. Additionally our instrumentation works with many Tracer Gas Detection devices using various tracer gases like:

Helium – He, Hydrogen – H2, Carbon Dioxide – C02, and different percentages of mixtures with Nitrogen.

Global provider of HVAC testing equipment

CTS serves HVAC industries around the world. Wherever you are, CTS products can help you ensure that your HVAC systems adhere to environmental standards.

CTS can meet your specialized needs. Contact us to learn more.