FEP Permeation Model (TP)

 
 
Click image to enlarge

The TP model calibrated helium leak standard was developed to calibrate vacuum systems and helium leak detectors that test under vacuum. This model works well in an industrial environment and is the best choice for applications where the calibrated leak standard will be exposed contaminates, such as on a vacuum chamber application. Cincinnati Test Systems utilizes the finest grade of FEP available to manufacture their FEP leak elements. The leak elements have been tested at temperatures ranging from 10°C to 40°C yielding a temperature coefficient of approximately 2.5%/°C with no anomalous behavior.

Features:

  • Unbreakable FEP permeation type leak element
  • All welded stainless steel construction
  • Complete with a shut off valve
  • Not susceptible to plug

This model is available with various sizes of DOT rated gas reservoirs, the reservoir size is usually dictated by the leak rate to insure an acceptable yearly depletion rate.

QUOTE REQUEST

CAN THE CUSTOMER REFILL A LEAK STANDARD FROM A GAS SOURCE REGULATED TO LESS THAN 600PSIG. (AFFORDS POSSIBILITY OF A VARIABLE RATE MODE OR OPEN STYLE):
  • Yes
  • No
VOLUMETRIC FLOW UNITS:
GAS INLET FITTING. (NOT REQUIRED FOR LEAK STANDARD MODELS WITH GAS RESERVOIRS.):
GAS INLET FITTING (IF OTHER, PLEASE SPECIFY):
 
GAS OUTLET FITTING (NOT REQUIRED FOR "SNIFFER" TYPE APPLICATIONS. SPECIFY LEAK DETECTOR MANUFACTURER AND MODEL NUMBER UNDER OTHER.):
GAS OUTLET FITTING (IF OTHER, PLEASE SPECIFY):
 
GAS TYPE:
GAS TYPE (IF OTHER, PLEASE SPECIFY):
 
LEAK RATE:
LEAK RATE:
 
TEST PRESSURE & UNITS :
TEST PRESSURE & UNITS (IF APPLICABLE):
 
WHICH OF THE FOLLOWING BEST DESCRIBES YOUR INTENDED APPLICATION?:
WHICH OF THE FOLLOWING BEST DESCRIBES YOUR INTENDED APPLICATION? (IF OTHER, PLEASE SPECIFY) :
 
QUANTITY:
Ordered
in Lots of: 1